Thanks: 0
Likes: 0
Dislikes: 0
what the heck is the reference point for the auto detect for the guides in the bypass tray on this one. i was fooling with it for about an hour and couldn't get it in the right spot. i did notice the arrow on the belt but couldn't get it. i don't have the sm for this one. thanks much t
Im not shore to undestand your question.Maybe this pdf can help!
pick up.pdf
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Originally Posted by T911
what are u trying to detect - paper size>paper> or transparencies
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Paper size
FOLLOW THE POSTED MF Tray adjustment above
Use it to make cassette/manual feeder-related adjustments.
If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure to
enter the settings indicated on the service label. If you have replaced the paper width detecting
VR or want to enter settings newly, be sure to execute FUNCTION>CST in service
mode.
Using the Mode
1) Place A4R paper in the multifeeder, and adjust the side guide to A4R.
2) Select <MF-A4R> to highlight, and press the OK key.
• The machine executes automatic adjustment and stores the value.
3) Likewise, perform steps 1. and 2. for A6R and A4.
if u don't have listed paper look at guide marks to set
COPIER>ADJUST>CST-ADJ>MF-A4R
Use it to adjust the paper width basic value of A4R paper for the manual
feed tray.
COPIER>ADJUST>CSRT-ADJ>MF-A6R
Use it to adjust the paper width basic value of A6R for the manual feed tray.
COPIER>ADJUST>CST-ADJ>MF-A4
Use it to adjust the paper width basic value of A4 paper for the manual feed
tray.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
please check the wiring and change the manual feeder size detection switch
It was the manual tray pcb and switch. Teckat thanks for your post too.
thanks,
u will usually be pointed to the correct area by many of the forum contributors
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Reply With Quote
Bookmarks