Black screen. no boot up when power on but power LED is light on control panel. Any suggestion
Black screen. no boot up when power on but power LED is light on control panel. Any suggestion
controller power supplyFM2-2764-000
When you turn on the machine there is no power up sequence, no LCD display, and the control panel Green LED is on. The All-Night Power Supply protection circuit may be shutting off power to all loads. The RMT1 and RMT2 signals are used to trigger the protection circuit and disable the power supplies.
SEE>>>>No Power-No Display-CP LED On RMT1 Checks.doc
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
solution is here..
https://youtu.be/cCC4D-ve2K4
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
A friend had the same problem the other day and it was a loose connector on the main controller so don't rule out the easy ones.
Bookmarks