Thanks: 0
Likes: 0
Dislikes: 0
Hello everybody. I have a Canon MF6540PL and i want to keep track of the printed and copied pages(printed jobs), but there is no option in the printer menu(kind of reporting list option). I have tried with different software but still no results. Thank you in advance..
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PLOriginally Posted by alban123
This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies.
The counter set increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).
TOTAL (Total counter)
SERVICE1 --Service total counter 1
SERVICE2 --Service total counter 2
TTL --Total counter
COPY --Total copy counter
PDL-PRT --PDL print counter
FAX-PRT --Fax print counter
REP-PRT --Report print counter
2-SIDE --Double-sided copy/print counter
SCAN Scan counter
PICK-UP (Paper pickup counter)
C1 --Cassette 1 jam counter
C2 --Cassette 2 jam counter
C3 --Cassette 3 jam counter
C4 --Cassette 4 jam counter
MF --Manual feed tray pickup total counter
2-SIDE --Double-sided paper pickup total counter
FEEDER (Feeder related counters)
FEED --Feeder pickup total counter
DFOP-CNT --ADF open/close hinge counter
JAM (Jam counters)
TTL--Unit total jam count
FEEDER --Feeder total jam count
SORTER --Finisher total jam count
2-SIDE --Duplex unit jam counter
MF --Manual feed tray jam counter
C1 --Cassette 1 jam counter
C2 --Cassette 2 jam counter
C3 --Cassette 3 jam counter
C4 --Cassette 4 jam counter
MISC --(Other required counter) WST-TNR Waste toner counter
Parts counter list
Item----Counter----Explanation----Service life
DRBL-1 (Unit supplies)
FX-UNIT--Fixing unit paper pass count---150,000
TR-ROLL--Transfer charger roller high-voltage ON count---150,000
DV-UNT-C--Developing unit rotation count---150,000
M-PU-RL--Manual feed tray pickup roller paper pass count---150,000
M-SP-PD--Manual feed tray separation pad paper pass count---150,000
Clearing Counters
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
- Maintenance/parts counter all clear
Execute service mode > CLEAR > COUNTER to clear all maintenance/parts counters.
- Counter clear on parts replacement
Press the numeric keypad key 0 after displaying the counter for a part just replaced, and the counter will be cleared individually.
Report Output (REPORT)
COUNTER REPORT=Counter output
Maintenance/supplies counter output.
(For more detailed information about the maintenance/supplies counter output,
execute service mode > Display counter information > Counters.)
RUI???
Remote User Interface ----???
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Sorry but i cant understand (im not that much into printers). Is it kind of supply, is it a software or an option in the printer system which i havent discovered yet? Thanks
If your machine is connected in a network, than by typing the ip address of the printer in explorer, you can see all the counters you need to see.
Comprende ?
READ>>>>RUI.pdf
System Requirements for the RUI: 1.Operating System - Windows 9x PC, Windows NT 4.0 + SP 3 or higher, Windows 2000, Windows XP, Windows Vista, and Windows 2003.
2.Web Browser - Internet Explorer 4.01 SP1 or higher, Netscape Navigator 4.6 or higher
How to configure the RUI:
1.Set the RUI to On, under Additional Functions, System Settings, Remote UI. (make sure that HTTP is also enable and no IP address ranges are set for HTTP access)
2.Type in IP address of the imageRUNNER in the browser address bar.
rui.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
What about the copies? I want to count the copies too.
thanks a lot guys. ill give a try tomorrow and see if it works.
Are you sure this works for my model (mf6450pl). I cant find the network card installed in the printer so i cant connect it to the network. I have connected it into a pc and shared in all the network. Furthermore, i couldn't find the Remote UI under the System Settings. Please help me it is urgent.READ>>>>RUI.pdf
System Requirements for the RUI: 1.Operating System - Windows 9x PC, Windows NT 4.0 + SP 3 or higher, Windows 2000, Windows XP, Windows Vista, and Windows 2003.
2.Web Browser - Internet Explorer 4.01 SP1 or higher, Netscape Navigator 4.6 or higher
How to configure the RUI:
1.Set the RUI to On, under Additional Functions, System Settings, Remote UI. (make sure that HTTP is also enable and no IP address ranges are set for HTTP access)
2.Type in IP address of the imageRUNNER in the browser address bar.
rui.jpg
sorry, think the MF6580 in your series, only has that RUI turn on feature in system settings
--------------------------------------------------------
Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)
Before you start the Remote UI, select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, and verify the IP address of the machine.
then>>>>>>>>>
Start the web browser, enter the IP address of the machine, then press [Enter] on the keyboard
Last edited by teckat; 10-22-2011 at 04:47 AM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
The problem is that my printer doesnt have the network card or network connection, so it could not have the ip. Is there any program or any printer option ?
Reply With Quote
Bookmarks