Hello, iam sergio, from mexico and i need the service manual canon imagepress C1,
Thanks for help
Hello, iam sergio, from mexico and i need the service manual canon imagepress C1,
Thanks for help
And what do you have to offer in return?
Nah, I have all of those.
hi sergio do you have any system software of a fiery i need the system image pass s1 and s2, i have the manual of c1 we can change it
saludos!!!!!
Last edited by cesar.m; 10-27-2011 at 04:32 AM.
Hi Sergio.Tell us what's wrong with the printer.Maybe is your lucky day.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
This error indicates a bad main or sub power supply. After checking the power supplies, it was discovered that this code can also be generated by a loose connection to the buffer decurling unit. These are the connectors that go to the copier from the decurling unit.
Decurler1.jpg
This is the connector for your decurler and can easily be come partially disconnected causing your error
Accidents don't just happen. They must be carelessly planned.
The machine would not come to a "Ready" state. It would show an E009 with sub code 0000. All 24 and 13 Volt lines were good from the power supply to the DC Controller. We did not have 24 volt at J1164, pin 10 going to the De-Curler pcb from the DC Controller.
Accidents don't just happen. They must be carelessly planned.
Bookmarks