[Error Code] Error 004 in IR8070

[abkonnet]

What Really causes error 004 in 8070.When i turn on the machine if Front door open the machine Turns ON. and close the Door none of the Fixing unit function is Working. The heating Element is Not heating. The error appeared followed after Error 0000.

[nivssluck]

Re: Error 004 in IR8070

What Really causes error 004 in 8070.When i turn on the machine if Front door open the machine Turns ON. and close the Door none of the Fixing unit function is Working. The heating Element is Not heating. The error appeared followed after Error 0000.

try clear the error first and see....

[abkonnet]

Re: Error 004 in IR8070

Ya cleared.

[nivssluck]

Re: Error 004 in IR8070

Ya cleared.

and then?

[abkonnet]

Error 004

[nivssluck]

Re: Error 004 in IR8070

Error 004

E004 The fixing assembly is faulty.
0000 The SSR used to drive the fixing heater has a
short circuit (detection by hardware circuitry).
- Replace the AC driver PCB.
- Replace the DC controller PCB.
Caution
You will have to clear the error in service mode
(COPIER>FUNCTION>CLEAR>ERR).

Ask Paul for a service manual if you dont have any....

[abkonnet]

Re: Error 004 in IR8070

In my Service Manual No description for Er004-0001. Did ur Manual Have it.

[teckat]

Re: Error 004 in IR8070

In my Service Manual No description for Er004-0001. Did ur Manual Have it.

first do
COPIER>FUNCTION>CLEAR>ERR- power off/on

It may be necessary to replace the AC Driver PCB.
AC Driver (FG3-3988-000 ).

a broken heater lamp in the fuser can also cause E004.

[abkonnet]

Re: Error 004 in IR8070

But the Heater lamp is Good is the Thermal Switch cause the Error. Because this error is followed by Error 0000.

[teckat]

Re: Error 004 in IR8070

But the Heater lamp is Good is the Thermal Switch cause the Error. Because this error is followed by Error 0000.

thermal
switch (TP1) has an open circuit

[abkonnet]

Re: Error 004 in IR8070

Change the Thermal Switch and replace the Thermistors Machine turned ON.

[teckat]

Re: Error 004 in IR8070

Change the Thermal Switch and replace the Thermistors Machine turned ON.

is all working now