Greetings guys
iR 6570 the first side both at copying and at printing during the double-side press prints ideally precisely and the second side is printed with offset on direction Y approximately on 5 mm.
By the client demands ideally exact double-side a copy, the machine new, transversed 340000. By means of service mode > adjust > ADJ-XY it turns out
For example....
There is MS Word Dogument >>> page setup: top 20mm, bottom 20mm, left 20 mm, right 20mm
iR copying secon side >> top 25 mm, bottom 15mm, left 20mm, right 20mm
Whether probably the machine to adjust ideally precisely?
In advance I thank for All answers
Bookmarks