Hi guys,
anyone can guide me how to enable the total count (101) counter in the ir2525 screen.
now, when i press the counter button, it just show 102,113,301 and 501 counter.
i need the 101 counter.
thanks in advance.
Hi guys,
anyone can guide me how to enable the total count (101) counter in the ir2525 screen.
now, when i press the counter button, it just show 102,113,301 and 501 counter.
i need the 101 counter.
thanks in advance.
try the following - enter service mode select numeric parameter by using arrow keys. press ok. now select 056 by using arrow keys. then press ok. now counter 101 will be on display.
it should not be missing
101 is always displayed/software counter 1 of the control panel. This type of soft
counter 1 cannot be changed.
should be six counters listed for use ?? #2>6 can be changed.
To configure the Soft Counters go to Service Mode>#Numeric and change the values for 057 through 061. The Soft Counter 1 is fixed to Counter 101.
057 - Soft Counter 2
058 - Soft Counter 3
059 - Soft Counter 4
060 - Soft Counter 5
061 - Soft Counter 6
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I've noticed that almost all new Canon models come with 101 -counter hidden. That's quite odd, since it's probably the most needed counter. But I always just add it to the 7th. counter slot.
Last model range which I saw that the 101 -counter was visible straight from the factory was the iRC2380-3580 -series.
Bookmarks