Counter Memory PCB & SATA-Flash PCB List

[teckat]

Counter Memory PCB & SATA-Flash PCB List
[KEEP PCBs WITH THE NATIVE MACHINE AT ALL TIMES]

see pdf____________

NOTE:
COUNTER MEMORY PCB, SERIAL PCB, and SATA-Flash PCB MUST ALWAYS REMAIN WITH THE NATIVE MACHINE AT ALL TIMES AND NOT CHANGED WITH NEW PCBs AT THE SAME TIME!

E245: The upper limit imposed on writing to the counter memory has been exceeded. * Replace Counter Memory PCB & Clear E355
E246: Counter Memory PCB * Replace Counter Memory PCB
E247: Error in SRAM on Main Controller PCB and Counter Memory PCB. * Replace Counter Memory PCB & Clear E355
E350: Serial Number PCB * Replace Serial Number PCB (Controlled Part)
E354: Mis-Match between Counter Memory PCB, Serial PCB and Main Controller PCB * Place ALL Original PCB's back into machine
E355: Power-on Mismatch between Counter Memory PCB, Serial PCB and Main Controller PCB * Place ALL Original PCB's back into machine
E748: Error in the Flash PCB * Replace the SATA-Flash PCB

[eurokris]

thanks for teckat.

how to clear E355 in ir2520?
i hv 1pcs main con hving problem E247.after take from other machice for testing.
now the cant use any to clear E247?

thanks

[teckat]

thanks for teckat.

how to clear E355 in ir2520?
i hv 1pcs main con hving problem E247.after take from other machice for testing.
now the cant use any to clear E247?

thanks

check service mode-
is there a E355 Clear on iR2520 ??

Error code clear
CLEAR >ENGIN > ERRCLR; and then turn OFF and then ON the
power.


READ--------------
you are playing with Fire-
E247: Error in SRAM on Main Controller PCB and Counter Memory PCB. *
Replace Counter Memory PCB & Clear E355

E355: Power-on Mismatch between Counter Memory PCB, Serial PCB and Main Controller PCB *
Place ALL Original PCB's back into machine