Hello everyone, I have a problem with iRA5030.
The print density at the front and rear edges of the paper is light, at the center is OK.
It happens on all colours (CMYK), the meter is 9140 prints.
Hello everyone, I have a problem with iRA5030.
The print density at the front and rear edges of the paper is light, at the center is OK.
It happens on all colours (CMYK), the meter is 9140 prints.
I have worked on IR3880 and earlier color, not sure if the same. Do internal print see what happens, if same look at transfer mabey not sitted properly, laser filters dirty.
Thank you.
Problem solved, the ITB Sub Pressure Release Lever was not set properly causing the ITB not contacting the drum evenly.
good find. I'm sure this will help some others in the future!
Accidents don't just happen. They must be carelessly planned.
Bookmarks