Hi.can i know error codes of my meshine (canon ir 105+) and solving them?pls send me a broshor containing all of error code.thanks
Thanks: 0
Likes: 0
Dislikes: 0
know solving a error code
Hi.can i know error codes of my meshine (canon ir 105+) and solving them?pls send me a broshor containing all of error code.thanks
hello Dr .
you know there alots for error codes for this machine ,you just want to take information or you have an error want to solve it .anayway
i ll do my best to scan for u some of it .
Send error code please.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Originally Posted by dr.mansoor
The error codes are grouped as follows according to the items they refer to:
E000 to E399 error code =related to the copier
E400 to E499 error code =related to the ADF
E500 to E514 error code =related to the finisher
E515 error code =related to the inserter
E518 error code =related to the paper folding unit
E530 to E595 error code =related to the finisher
E5F0 to E5F9 error code =related to the saddle stitch assembly
E601 to E830 error code =related to the copier
When the self diagnostic mechanism has gone ON, the machine may be reset by turning its power switch. This, however, does not apply to E000, E001, E002, E003, E004, E005, E013, E020, or E717, indicating a fault which can lead to serious consequences if the machine is reset without removing the cause (i.e., melting thermistor, which will overheat the fixing roller, or overflowing of toner from the hopper).
-If the code is from E000 to E003, the power switch will go OFF in about 30 sec if it is turned ON without resetting; in the case of E004, the power switch will go OFF in about 3 sec after indicting E000 if the power switch is turned ON without resetting.
-You will have to clear the data in the RAM on the DC controller PCB for the following: E000, E001, E002, E003, E004, E005, E013, E020, and E717.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
see pdf___iR105 ERROR CODES
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Wery generous!
eyiew7x.gif
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Re: know solving a error code
hi.thanks dear feiend.for example 000069.
I just posted u above >an entire pdf of the ERROR CODES descriptions/ did u download itor read it
http://www.copytechnet.com/forums/at...105-errors.pdf
E069
Main cause The HV-DC PCB is faulty. The HV-AC PCB is faulty. The transfer charging assembly is faulty. The wiring is faulty (short circuit, open circuit). Condition
-0000 An error (leakage) is detected in the high-voltage output to the transfer charging assembly.
here is a one page pdf for troubleshooting E069
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
iR105 Troubleshooting.pdf
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Re: know solving a error code
okkk.very very thanks.very gooddd.
Posting Permissions
Reply With Quote
Bookmarks