Hi,
Zoraldinho, open the link from my previous message. There you find the models witch applies to (including models from 2000, 4000, 5000, 7000 and 9000 series).
Br
Tasnadi Zsolt
Hi,
Zoraldinho, open the link from my previous message. There you find the models witch applies to (including models from 2000, 4000, 5000, 7000 and 9000 series).
Br
Tasnadi Zsolt
Hi,
With the same printer I have another problem, and I don`t know where should I start....
If I try to print from the network a file bigger than 3 Mb, the file sending procedure stops at 2,75-2,93 Mb and I get an error on the computer (the file cannot be sent). I`we tried at 3 different computers (2 laptops connected through WiFi and a wired connected PC).
The interesting thing is that if I connect the printer to a computer through an USB cable, it works without any problem....
Should I missadjust something on the printer (when I tried to resolve the previous problem) or there is a problem with the network??
Any hint is appreciated!
br,
Tasu
I had this issue with a 2020L - would not print over 3Mb over network, would work over USB.
I never did figure it out and I tried everything short of changing the controller, personally I think can only be a memory issue
Then surprisingly the USB stopped working as well, now I just use it for parts and throw things at it.
IRA 2020 = The biggest turd since the 3100..........
Will watch this thread with interest.
well i got a couple of IRA C2020L working as printers copiers and scanner and never had any problems with it, clients always printed large files by network, have you updated the firmware? oh and also never heard of this tool to calibrate in the canon trainings
Life is a learning continuum...
Count yourself lucky had nothing but major issues with the 2020 series.
Bookmarks