Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    275
    Rep Power
    28

    IR 5055N ERR0 E0004-0103

    This machine having run 50 copies now shows error E0004-0103 remember the wiring had been destroyed by the rats and rewired.Whenever i try to reset in service mode the error re-appears ,checked the fuser element tis ok and the whole fixing unit.even fixing unit switch pcb all components are ok.Any suggestions welcome ,thanks.

  2. #2
    teacher-guide-expert-guru 2,500+ Posts
    IR 5055N ERR0 E0004-0103

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: IR 5055N ERR0 E0004-0103

    Check Fixing Thermistor

    Due to the breakage of Dumet Wire of the Fixing Thermistor, (abnormal rise in temperature)/ E004 (IH
    Power error/ IH Control Mechanism error) may occur.

    Capture_049.jpg

    You have all new destroyed cables i believe.
    Last edited by zoraldinho; 11-20-2011 at 02:33 PM.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  3. #3
    Technician
    Join Date
    Nov 2009
    Posts
    16
    Rep Power
    30

    Re: IR 5055N ERR0 E0004-0103

    I had this issue and had to replace DC.

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    275
    Rep Power
    28

    Re: IR 5055N ERR0 E0004-0103

    Heater element does not go on at all ,any problem with the DC pcb?

  5. #5
    Service Manager 250+ Posts gensys's Avatar
    Join Date
    Jan 2011
    Location
    Yerevan, AM
    Posts
    324
    Rep Power
    30

    Re: IR 5055N ERR0 E0004-0103

    Quote Originally Posted by COPIERTEC ASSOCIATES View Post
    This machine having run 50 copies now shows error E0004-0103 remember the wiring had been destroyed by the rats and rewired.Whenever i try to reset in service mode the error re-appears ,checked the fuser element tis ok and the whole fixing unit.even fixing unit switch pcb all components are ok.Any suggestions welcome ,thanks.
    ir6570 e0004-00103
    The Road will be Mastered by >>> the Going...

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    275
    Rep Power
    28

    Re: IR 5055N ERR0 E0004-0103

    Thanks so much Gensys for your referal thread on ir 6570 it really assisted me a lot.Infact there were faulty components caused by the acidic urine of the rats.some diodes were shorting and rusty resistors were replaced and machine running ok. Let me in a special way thank Teckat for the illustrative diagrams posted on that thread thanks so much guys!

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    275
    Rep Power
    28

    Re: IR 5055N ERR0 E0004-0103

    sorry for not mentioning the board in question ,it is the Induction heater supply pcb.

  8. #8
    teacher-guide-expert-guru 2,500+ Posts
    IR 5055N ERR0 E0004-0103

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: IR 5055N ERR0 E0004-0103

    Buy a cat my friend.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  9. #9
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: IR 5055N ERR0 E0004-0103

    i have same problem since 2 months and i didnt left anything to change from dc,ih pcb,main board,unit one , duplex,cylinder , drum unit ,ac pcb,upper assembly and the error wont go , till i changed the machine body to another one ,but i didnt stop seeking for the solution but till now i didnt know what is going on in this machine ,as i read the in the previous threads i noticed that this happened with lots of colleagues and i have a question where the IH cable guide unit located ,and i didnt know where actually is it the one that the unit 1 connect it inside the machine !!


    im totally dizzy with that problem :/
    Distinguished road makes you jewel in rough

  10. #10
    Junior Member
    Join Date
    Apr 2011
    Posts
    2
    Rep Power
    0

    Re: IR 5055N ERR0 E0004-0103

    Quote Originally Posted by mramlawi View Post
    i have same problem since 2 months and i didnt left anything to change from dc,ih pcb,main board,unit one , duplex,cylinder , drum unit ,ac pcb,upper assembly and the error wont go , till i changed the machine body to another one ,but i didnt stop seeking for the solution but till now i didnt know what is going on in this machine ,as i read the in the previous threads i noticed that this happened with lots of colleagues and i have a question where the IH cable guide unit located ,and i didnt know where actually is it the one that the unit 1 connect it inside the machine !!
    im totally dizzy with that problem :/
    basically, e004 related with the fuxing unit. Have u tried to swap a whole fixing unit from other machine? If u've tried to swap with other unit and the result were still the same, then the problem might be at your DC controller or the wiring after fixing unit to DC Controller.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here