Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    186
    Post Thanks / Like
    Rep Power
    0

    IR 5055N ERR0 E0004-0103

    This machine having run 50 copies now shows error E0004-0103 remember the wiring had been destroyed by the rats and rewired.Whenever i try to reset in service mode the error re-appears ,checked the fuser element tis ok and the whole fixing unit.even fixing unit switch pcb all components are ok.Any suggestions welcome ,thanks.


  2. #2
    Field Supervisor 2,500+ Posts


    zoraldinho's Avatar
    Join Date
    Mar 2008
    Posts
    3,242
    Post Thanks / Like
    Rep Power
    57

    Re: IR 5055N ERR0 E0004-0103

    Check Fixing Thermistor

    Due to the breakage of Dumet Wire of the Fixing Thermistor, (abnormal rise in temperature)/ E004 (IH
    Power error/ IH Control Mechanism error) may occur.

    Capture_049.jpg

    You have all new destroyed cables i believe.

    Last edited by zoraldinho; 11-20-2011 at 02:33 PM.
    <----- Click on Kudos star 2 say Thanks




    A little knowledge is a dangerous thing Click here to be sure





  3. #3
    Technician
    Join Date
    Nov 2009
    Posts
    16
    Post Thanks / Like
    Rep Power
    12

    Re: IR 5055N ERR0 E0004-0103

    I had this issue and had to replace DC.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    186
    Post Thanks / Like
    Rep Power
    0

    Re: IR 5055N ERR0 E0004-0103

    Heater element does not go on at all ,any problem with the DC pcb?


  5. #5
    Service Manager 250+ Posts gensys's Avatar
    Join Date
    Jan 2011
    Location
    Yerevan, Armenia.
    Posts
    324
    Post Thanks / Like
    Rep Power
    12

    Re: IR 5055N ERR0 E0004-0103

    Quote Originally Posted by COPIERTEC ASSOCIATES View Post
    This machine having run 50 copies now shows error E0004-0103 remember the wiring had been destroyed by the rats and rewired.Whenever i try to reset in service mode the error re-appears ,checked the fuser element tis ok and the whole fixing unit.even fixing unit switch pcb all components are ok.Any suggestions welcome ,thanks.
    ir6570 e0004-00103

    The Road will be Mastered by >>> the Going...

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    186
    Post Thanks / Like
    Rep Power
    0

    Re: IR 5055N ERR0 E0004-0103

    Thanks so much Gensys for your referal thread on ir 6570 it really assisted me a lot.Infact there were faulty components caused by the acidic urine of the rats.some diodes were shorting and rusty resistors were replaced and machine running ok. Let me in a special way thank Teckat for the illustrative diagrams posted on that thread thanks so much guys!


  7. #7
    Senior Tech 100+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    186
    Post Thanks / Like
    Rep Power
    0

    Re: IR 5055N ERR0 E0004-0103

    sorry for not mentioning the board in question ,it is the Induction heater supply pcb.


  8. #8
    Field Supervisor 2,500+ Posts


    zoraldinho's Avatar
    Join Date
    Mar 2008
    Posts
    3,242
    Post Thanks / Like
    Rep Power
    57

    Re: IR 5055N ERR0 E0004-0103

    Buy a cat my friend.

    <----- Click on Kudos star 2 say Thanks




    A little knowledge is a dangerous thing Click here to be sure





  9. #9
    Junior Member
    Join Date
    Feb 2015
    Posts
    1
    Post Thanks / Like
    Rep Power
    0

    Re: IR 5055N ERR0 E0004-0103

    thanks


  10. #10
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    521
    Post Thanks / Like
    Rep Power
    13

    Re: IR 5055N ERR0 E0004-0103

    i have same problem since 2 months and i didnt left anything to change from dc,ih pcb,main board,unit one , duplex,cylinder , drum unit ,ac pcb,upper assembly and the error wont go , till i changed the machine body to another one ,but i didnt stop seeking for the solution but till now i didnt know what is going on in this machine ,as i read the in the previous threads i noticed that this happened with lots of colleagues and i have a question where the IH cable guide unit located ,and i didnt know where actually is it the one that the unit 1 connect it inside the machine !!


    im totally dizzy with that problem :/

    Distinguished road makes you jewel in rough

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here