Canon IR2016

[mramlawi]

Dear friends ,
i have canon IR2016 and i have a Feeder problem ,i attached the photo down need ur help to adjust thanks alot
canon.JPG

[zoraldinho]

I can see a shit on this photo.

[zaza]

hello friend technician pls you do it this copy by feed cassette or by by pass .....other l think you must be cleaner all roller feeding paper for cassette and by pass ....for this raison the copy is left in her direction ...try it and we waiting your opinion my friend ...

[mramlawi]

Hello friends

im using the cassette this a feeder problem the margin is so closer .i want to adjust it ,u still young my friend u can see the pic clear :P

[skynet]

In service mode use the right arrow to scroll to NUMERIC press OK use the right arrow to select 41

041: Vertical scan start position adjustment (when scanning on a document fed from ADF)>

Adjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of the
image becomes.

The default setting is 35.

[mramlawi]

thanks man i ll try it and reply

[zaza]

Hello friends im using the cassette this a feeder problem the margin is so closer .i want to adjust it ,u still young my friend u can see the pic clear :P

yes my friend but this pictures is not very clear ..pls try again ....'f' navrais mais la photo n'es pas trop claire , tache de la zoomer bien grand ..je croix que tu as un problèmes de bord d'attack ...ou le niveau de la marge de débit ai grand d'un ou deux centimètre environ ....si le cas entre au service mode ai change les paramètres de marge avent ....bon chance .

[mramlawi]

thanks Zaza but i dont understand Frensh iam english educated thanks anyway

[zaza]

ok my friend we are technician friends

[Simons]

The feed problem with the 2016 is that the feed assemblys need to be replaced!! There are tech pubs about it. You cant replace just the top one because that will throw gear timing off for the bottom.

Both feed assembly need replaced, prefer at the same time. Becareful of small spring on top assembly, open door and remove it before work. . Top assy was revised several times. Lower once. Ir2020 same thing. Replace assemblys or part out .