Registration problem on IPRC.7010VP

[twinax]

Hello Guys,

On IPRC 7010VP counter (102) = 1 000 000 prints we have a registration problem, in feed direction.

Image is moved around 15 mm without any error code.

All sensors involved have been cleaned, checked ...

ITB belt replaced.

This problem is not permanent only sometimes on set (10%).

Any idea ?

Thanks for your help.

Regards,

[zoraldinho]

Binder1.pdf

[twinax]

Hi,

This problem has been solved by replacement of all bearings into synchronisation module.

regards,

Twinax