Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2008
    Posts
    102
    Rep Power
    20

    IR1023IF "download standby"

    Comes to this condition at power on. I can't get any response anywhere. In the history this same thing happened in February and the tech "reloaded batch". Is this software available? Is it worth it if it keeps coming back? Thanks for any info.


  2. #2
    Service Manager 10,000+ Posts
    IR1023IF "download standby"

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213

    Re: IR1023IF "download standby"

    Quote Originally Posted by RSCA View Post
    Comes to this condition at power on. I can't get any response anywhere. In the history this same thing happened in February and the tech "reloaded batch". Is this software available? Is it worth it if it keeps coming back? Thanks for any info.

    do it again


    v68.01.01 for the imageRUNNER 1023/ 1023N/ 1023iF Copiers

    <Points to note>
    (1) If upgrading from an older version to v60.03 (or later), the BOOT area is increased.
    At the same time, the SYSTEM writing start address (FLASH-ROM) is changed.
    The SYSTEM writing start address is included in the BOOT v60.03 and later, so after BOOT has
    completed downloading, turn OFF and ON the power, so that the new SYSTEM writing start address is
    reflected.
    Upgrade procedures
    <Without options>
    1. Overwrite BOOT.
    2. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
    (Download mode starts.)
    3. Overwrite SYSTEM.
    <With OPT16MB>
    1. Overwrite BOOT.
    2. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
    (Download mode starts.)
    3. Overwrite OPT16.
    4. Check that "OK" appears on the touch panel display. Then, turn OFF and ON the power manually.
    (Download mode starts.)
    5. Overwrite SYSTEM.
    <With OPT32MB>
    1. Overwrite BOOT.
    2. Check that "OK" appears on the touch panel display. Then, turn off and on the power manually.
    (Download mode starts.)
    3. Overwrite OPT32.
    4. Check that "OK" appears on the touch panel display. Then, turn off and on the power manually.
    (Download mode starts.)
    5. Overwrite SYSTEM.

    or replace the IP (Image Processor) pcb

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Junior Member
    Join Date
    Dec 2011
    Location
    Pristina
    Posts
    5
    Rep Power
    0

    Re: IR1023IF "download standby"

    you have to upgrade your firmware with SST


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here