Ir4570 feeder adjust

[mramlawi]

hello ,
canon IR4570 i need information how to adjust the feeder of it how to adjust the margin up and down left and right
also if how can i adjust the margin of the casette in program .

[skynet]

The margins on the feeder can be adjusted with service mode > Feeder > adjust > doc stop.

This will move the image in the direction of the arrows

1.jpg

- if the image is displaced to the leading edge, decrease the setting.
- if the image is displaced to the trailing edge, increase the setting.
unit of adjustment: 0.1 mm


The top and bottom margins for each cassette can be adjusted in service mode level 2 > Copier > adjust > misc C1/2/3/4-ADJ-Y

This will move the image in the direction of the arrows

2.jpg

C1/2/3/4-
ADJ-Y
Entering a horizontal registration adjustment value for Cassette 1/2/3/4
Enter the horizontal registration adjustment value for Cassette 1/2/3/4.
Enter the laser writing start position on the paper picked up from Cassette 1/2/3/4,
based on the registered value.
An increase by +1 enlarges the front margin by 0.1mm.
<Note>
When clearing RAM of the DC controller PCB or replacing the PCB, enter the
service label value.

[mramlawi]

Thanks man