Controllers to be installed the patch:
imagePRESS Server T1
imagePASS-J1
Color Network Printer Unit-J1
imagePASS-H1
Color Network Printer Unit-H1
patch file 1-V9XFT for image PRESS Server T1 (v1.11)..................1-V9XFT.zip
Installation procedures:
1. Download 1-V9XFT patch using Direct Queue on the Command Work Station.
2. Wait for approximately 1 minute.
3. Shut down both the main unit and EFI controller.
4. Remove the power cable of EFI controller and wait for approximately 1 minute.
5. Turn on the power of main unit and EFI controller.
6. After the restart, make sure that the installed patch name is displayed and BIOS version is upgraded to 1.11 in the
Config Page.
This patch is used for the following EFI controllers only. Do not install this patch to the other controllers. (If you do
so, you cannot make further operations.)
Bookmarks