Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: ir1023

  1. #1
    Senior Tech 250+ Posts
    ir1023


    Join Date
    Nov 2008
    Location
    Tennessee
    Posts
    356
    Rep Power
    35

    ir1023

    has anyone tried to install an adf onto an ir1023 from another machine? I have 2 ir1023 (platen top). Also have 2 iR1023N's with adf's. When I install the adf onto the 1023 from one of the N versions, I get fuzzy copies from the feeder, seems to feed fine, they are just blurry, fuzzy, and light from the feeder. Is there an adjustment in the SM that I am missing. Is there something particular that needs to be changed. I figured just plug and play. Not so with these, Have tried both feeders on both machines. the platen models I have are very low meter and have a customer that only needs the copy function. Any tips??? Thanks!!

  2. #2
    Senior Tech 100+ Posts HELIO240's Avatar
    Join Date
    Jan 2011
    Location
    BRAZIL
    Posts
    137
    Rep Power
    0

    Re: ir1023

    Quote Originally Posted by copicatt View Post
    has anyone tried to install an adf onto an ir1023 from another machine? I have 2 ir1023 (platen top). Also have 2 iR1023N's with adf's. When I install the adf onto the 1023 from one of the N versions, I get fuzzy copies from the feeder, seems to feed fine, they are just blurry, fuzzy, and light from the feeder. Is there an adjustment in the SM that I am missing. Is there something particular that needs to be changed. I figured just plug and play. Not so with these, Have tried both feeders on both machines. the platen models I have are very low meter and have a customer that only needs the copy function. Any tips??? Thanks!!
    Have you tried upgrading the machine. In a clear and after all update installed machine with DADF. It may be that certain.

  3. #3
    Senior Tech 250+ Posts
    ir1023


    Join Date
    Nov 2008
    Location
    Tennessee
    Posts
    356
    Rep Power
    35

    Re: ir1023

    No I haven't tried that and honestly do not have the system software for this series but may need to locate it. thought maybe needed to adjust it in SM. Also thought maybe just can't put feeder on this, or maybe need to move the network print with it. Don't know and can't figure it out by the manual.

  4. #4
    Service Manager 1,000+ Posts
    ir1023

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64

    Re: ir1023

    Quote Originally Posted by copicatt View Post
    has anyone tried to install an adf onto an ir1023 from another machine? I have 2 ir1023 (platen top). Also have 2 iR1023N's with adf's. When I install the adf onto the 1023 from one of the N versions, I get fuzzy copies from the feeder, seems to feed fine, they are just blurry, fuzzy, and light from the feeder. Is there an adjustment in the SM that I am missing. Is there something particular that needs to be changed. I figured just plug and play. Not so with these, Have tried both feeders on both machines. the platen models I have are very low meter and have a customer that only needs the copy function. Any tips??? Thanks!!
    I doubt there is any adjustment, but there as the holders that the CIS glides on that might not be installed on your device because it was a platen top and not DADF equiped....see PDF>>>>http___www.techsupport.cusa.canon.com_utility_printArticle.pdf
    Accidents don't just happen. They must be carelessly planned.

  5. #5
    Senior Tech 250+ Posts
    ir1023


    Join Date
    Nov 2008
    Location
    Tennessee
    Posts
    356
    Rep Power
    35

    Re: ir1023

    Thanks for the publication, I will look at that and let you know!

  6. #6
    Senior Tech 250+ Posts
    ir1023


    Join Date
    Nov 2008
    Location
    Tennessee
    Posts
    356
    Rep Power
    35

    Re: ir1023

    Well, it looks like the spacers are already installed, was hoping they were missing.

  7. #7
    Service Manager 10,000+ Posts
    ir1023

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: ir1023

    Quote Originally Posted by copicatt View Post
    has anyone tried to install an adf onto an ir1023 from another machine? I have 2 ir1023 (platen top). Also have 2 iR1023N's with adf's. When I install the adf onto the 1023 from one of the N versions, I get fuzzy copies from the feeder, seems to feed fine, they are just blurry, fuzzy, and light from the feeder. Is there an adjustment in the SM that I am missing. Is there something particular that needs to be changed. I figured just plug and play. Not so with these, Have tried both feeders on both machines. the platen models I have are very low meter and have a customer that only needs the copy function. Any tips??? Thanks!!

    The 50-sheet Duplexing Automatic Document Feeder
    (imageRUNNER 1023iF/1023N models only) for quick handling of multipage originals.

    GET THE PICTURE/ DF is a NA on the 1023


    iR1023.JPG
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Senior Tech 250+ Posts
    ir1023


    Join Date
    Nov 2008
    Location
    Tennessee
    Posts
    356
    Rep Power
    35

    Re: ir1023

    Thanks teckat, I did finally see that, but guess I didn't believe it. I gave up and will just use them to usb print in the shop or part out.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here