hello people I'm iR2030i displayed intermittently E020-0360, I know it's an error to supply cyan, now what can I do to solve this error once.
Dc-con in version 40.03
thanks.
hello people I'm iR2030i displayed intermittently E020-0360, I know it's an error to supply cyan, now what can I do to solve this error once.
Dc-con in version 40.03
thanks.
You may want to double check your manual:
Problem :
The imageRUNNER ADVANCE displays an E020-0360
Solution :
The imageRUNNER ADVANCE will display this error because the contact for the black developer is bent, this causes a poor connection between the black developer and the DC controller. The part number for the contact is FM3-8111-000.
Accidents don't just happen. They must be carelessly planned.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
[QUOTE = charm5496; 263570] Es posible que desee comprobar el doble de su manual:
Problema:
La imageRUNNER ADVANCE muestra un E020-0360
Solución:
La imageRUNNER ADVANCE mostrará este error porque el contacto para el desarrollador de negro se dobla, lo que provoca una mala conexión entre el promotor y negro el controlador DC. El número de contacto es FM3-8111-000. [/ QUOTE]
El problema de estos modelos de máquinas es el suministro pobre de toner, está ocasionado por que
la forma de detectar toner en la tolva es de manera óptica. La lente se queda manchada de toner, de manera que se cree que tiene toner no haciendo girar el cartucho de toner y quedandose el revelador
cada vez con menos toner.Cuando se realizan los parches en la ITB detecta un parche pobre y da el codigo de toner. Existe una solución que es limpiar los sensores, actualizar e sistema o sustituir la unidad reveladora por una modificada que trae como una pequeña menbrana que hace que vibre y no se acomule el toner en el sensor óptico.
The imageRUNNER ADVANCE will display this error because the contact for the black developer is bent, this causes a poor connection between the black developer and the DC controller. The part number for the contact is FM3-8111-000. See the following photo of the damaged developer contact.
Picture.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
You must need to chaange the new hopper with new Parts No.
Bookmarks