Have clc3220 with color misregistration as in attachment.
Tried with hew IU, IBT assy, lasers but still same.
Thanks in advance
Have clc3220 with color misregistration as in attachment.
Tried with hew IU, IBT assy, lasers but still same.
Thanks in advance
you will find loads of threads on this site for your problem,just do a search.think your next thing to try is to clear the dc-con but do a d and p print first so you can re input settings.
retime the laser units and reinstall. From the scan it appears all of your colors are in time except for the black.
Accidents don't just happen. They must be carelessly planned.
also performed dc con clear and then input values form P print.
thanks
if you search the threads there are instructions for performing the procedure. You have time pull the laser units out and turn the cams by hand till they click and then reinstall.
Accidents don't just happen. They must be carelessly planned.
Done that but still same.
I suspect on pattern reader unit, will try with new one tomorrow.
In service mode level 2 check laser unit and get OK result.
Then remove lasers and perform procedure to adjust cam position.
I had a working irc3200 and caused the symptoms you have by cleaning the belt cleaning blade, i had to replace the blade with a new one to get rid of the miss registration.
Scan Canon.jpg
READ THIS PDF---Color Displacement- -TP03-1.pdf
CHECK PATCH READ POSITION
PATCH READ.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks