Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Dec 2011
    Location
    Tamil nadu, chennai
    Posts
    12
    Rep Power
    25

    Thumbs up AnyOne Please Help me....

    i am facing error code e00064-0000 IN IR 3300 MACHINE, I HAVE REPLACED THE DRUM, AND ALSO CHECKED THE HVT PCB, STILL THE PROBLEM OCCUR, PLEASE ANY ONE GUIDE TO SOLVE THIS ISSUE THANKS IN ADVANCE....

    THANKS AND REGARDS
    MADHUSEL

  2. #2
    teacher-guide-expert-guru 2,500+ Posts
    AnyOne Please Help me....

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: AnyOne Please Help me....

    E064-0000


    The presence of a high-voltage error is communicated by the composite
    power supply PCB. (The output for primary charging, developing, or transfer
    has deviated from a specific level of voltage.)

    Main cause The contact has poor connection. The wiring is faulty. The composite power
    supply PCB is faulty. The DC controller PCB is faulty.


    Action

    1. Contact

    Is any of the contacts of the primary charging roller, developing assembly,
    or transfer charging roller soiled? Or, is there poor contact?
    YES: Clean the contact, and set it once again.

    2. Wiring

    Is the wiring between the contacts for the following normal: DC controller
    PCB (J301), composite power supply PCB (J136), primary charging roller,
    developing assembly, transfer charging roller?
    a. DC controller PCB (J301) <-> composite power supply PCB (J136)
    b. composite power supply PCB (J130-7) <-> primary charging roller contact
    c. composite power supply PCB (J130-1) <-> developing assembly contact
    d. composite power supply PCB (FT133) <-> transfer roller contact
    NO: Correct the connection.

    3. Composite power supply PCB, DC controller PCB

    Try replacing the composite power supply PCB. Is the problem corrected?
    YES: Yes.
    NO: Replace the DC controller PCB.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  3. #3
    Trusted Tech 50+ Posts dhanesh's Avatar
    Join Date
    Jun 2010
    Location
    Thiruvananthapuram, KERALA
    Posts
    63
    Rep Power
    0

    Re: AnyOne Please Help me....

    did u reset error and ram clear?
    DHANESH

  4. #4
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: AnyOne Please Help me....

    once Happen with me at the same machine and it was weakens on Electricity so check the power of the Socket try to plug it directly without any extanstions.

    regards
    Distinguished road makes you jewel in rough

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here