ImagePress C1 Error Code 020-0182 / 020-0220

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ricardobres
    Trusted Tech

    100+ Posts
    • Apr 2008
    • 147
    #1

    ImagePress C1 Error Code 020-0182 / 020-0220

    Hi guys. I cleaned the patch sensor, just it. I'm waiting the new patch sensor to replace it. Is there anything I can do until the patch sensor is not enough?
    Tags: None
    • zoraldinho
      teacher-guide-expert-guru

      Site Contributor
      2,500+ Posts
      • Mar 2008
      • 4999
      #2
      Re: ImagePress C1 Error Code 020-0182 / 020-0220

      Pach sensor is just fine usually.Inspect black plastic cover.Can be broken!

      Capture_070.jpg
      If it ain't broke, don't fix it
      A picture is worth a thousand words

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Re: ImagePress C1 Error Code 020-0182 / 020-0220

          Originally posted by ricardobres
          Hi guys. I cleaned the patch sensor, just it. I'm waiting the new patch sensor to replace it. Is there anything I can do until the patch sensor is not enough?
          E020-0182
          Check the slide rod, FC6-1043-010 . The plastic part of the rod may be broken>           causing the shutter to hang up
          See below:

          SlideRod.jpg

          D kit harness (part number FM2-2615-000 (J422 and J454) should also be replaced> which has been known to cause intermittent E020's.

          GOOD READ>>>>--
          Attached Files
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Previous template Next
            Working...