Ir 7095 machine when we print 1 side from adf theres no problem with the image but once we do double side from adf the image slide down approximate in 1cm. I got no idea is it the problem coming out from adf or duplex unit?
Ir 7095 machine when we print 1 side from adf theres no problem with the image but once we do double side from adf the image slide down approximate in 1cm. I got no idea is it the problem coming out from adf or duplex unit?
No idea is it the problem coming out from adf or duplex unit? Are you a tech?
Go to service mode and check with PG test print,2 side.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
You could also start by making a 2 sided copy from the glass to see if the adf is the source of the problem. If 2 sided copies from the glass are ok then clean all Adf sensors. Then try adf duplex copies again to see if any improvement. Do not do any sensor adjustments (Sens-Int) for the Doc feeder until you have cleaned all the sensors.
Last edited by blazebusiness; 01-04-2012 at 01:22 PM.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
ok will do so once i back to work tomorrow. Will give feedback as soon as possible
Hi, actually it happen only when using adf. Using glass to make 2sided theres no problem. But today it seems no problem with adf. But i scared it may come back again.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
Thanks you will note it down ..
Bookmarks