adf was dead and live couple times,.
and we change to other adf,,
still dead.
someone said we need new firmware,,
if anyone can help~.
let me know,
adf was dead and live couple times,.
and we change to other adf,,
still dead.
someone said we need new firmware,,
if anyone can help~.
let me know,
which ADF model do u have ?? look on metal plate on rear of unit--
what exactly is the issue please explain /power-errors-error messages-jams
do u see a steady green light when paper is present in tray ????
or does it flash on/off & post a jam message ?
for DADF M1/ check ADF Open/Close Sensor
PS502.jpg
which detects movement of the entire DADF-M1 unit when it is in the up or down position needs a change state.
The sensor can be checked in I/0 mode Copier > I/0 > Feeder address P001, Bit "3".
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
we had to down load upgrade firmware and
reset all adf Setting,..
service mode and adf than rest everything ,,
thanks, ~~
Bookmarks