CANON IR5000 E00061-0001 !

[Simons]

It can happen if the sensor is dirty OR THE DRUM NEEDS POLISHED. That is your easy fix.

[ARUN MISHRA]

THANKES ALL

[tinnyjay]

Hello friends

i have ir5000 copier , Appear an err E000061-0001 , i have reset the machine but the err was still consistent !I have checked The laser shutter / laser unit is not faulty DC controller too is not faulty but In vain ,LCD still displays this damn err ^^.



can anyone help me . Lot of thankx

This error is caused also by discharging lamps(led) of drum.
Once i opened drum unit and demaged one of wires of led lamps after i turned on the machine it showed me this error code.
If leds do not work the cleaning blade could not clean properly the drum.And it looks like is plated with toner and sensor reads out that toner causing the error code.

[ivanusicnm@gmail.com]

Hello friends

i have ir5000 copier , Appear an err E000061-0001 , i have reset the machine but the err was still consistent !I have checked The laser shutter / laser unit is not faulty DC controller too is not faulty but In vain ,LCD still displays this damn err ^^.



can anyone help me . Lot of thankx

REPLACE PRIMARY CORONA

[blazersnfkrz]

2) A white copy means you should check the Primary corona and HVT.

may I know sir what is an HVT?

[blazersnfkrz]

Check MSW2, the switch could be mis-adjusted or loose.

next--------------------


Disable potential control by going into service mode Copier > Option > Tempo > F-POT-SW. Now copies can be run.
1) A solid black copy means laser is defective.
2) A white copy means you should check the Primary corona and HVT.
3) A good copy means you should check the Potential sensor PCB.

may I know what is an HVT sir?

[teckat]

may I know what is an HVT sir?

High voltage transformer

Read free online manual
CANON IR5000 SERVICE MANUAL Pdf Download.

[techandtrader]

To keep them running you can turn off potential control until you get a new Pot Control sensor and the tool but first try to polish or coronas.