IRC 4580 with 194-999a error code. Replaced DCON2 Maisey per Navi suggestions. Colors are off in PF direction. Any Help would be appreciated.
IRC 4580 with 194-999a error code. Replaced DCON2 Maisey per Navi suggestions. Colors are off in PF direction. Any Help would be appreciated.
Last edited by racer42; 01-11-2012 at 04:59 PM.
There I was, 20.000ft. surrounded by commies, no fuel, shot to hell, cockpit panel fire, in an inverted tailspin, and I had to pee...
Problem :
E194-999A codes.
Solution :
E194-999A code is an image correction error. This can be caused by the DC controller (IMG) and/or the ITB assembly.
Start by making sure the machine has the latest software on it. Next check the ITB assembly for worn parts and replace as needed. In this case replacing both the ITB assembly (FM2-5365-000) and the DC controller 1 (IMG) resolved the 194-999A code.
Accidents don't just happen. They must be carelessly planned.
to add on--
another tech posted this pdf in the forum last year > credit to them
Color Shift Prevention / Correction
iRC4080i
iRC4580i
iRC5185i
CLC4040
CLC5151--------------see pdf--iRC5180_Color_Shift_Prevention _&_Correction.pdf
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks