Canon IR3530, department ID and Password Removal

[THUK]

hi guys this porn stuff should not be allowed.

[mrfixit51]

hi guys this porn stuff should not be allowed.

I reported it to the moderator,,, he will deal with it.

[Farid Shahab]

You enter service mode by pressing (Additional Functions *)>(2and 8 simultaneously)>(Additional Functions *) Keys. Once in service mode, don't change any other parameters or you will need to consult a service technician to get your machine running again.

Good Luck

Dear Sir, my photocopy is canon ir1020j and has the same problem that the dpt id password is forgotten and now we can't use it, is there any way to reset its password please. Thanks, Farid

[mrfixit51]

Dear Sir, my photocopy is canon ir1020j and has the same problem that the dpt id password is forgotten and now we can't use it, is there any way to reset its password please. Thanks, Farid

Additional Functions
2
8
Additional Functions
Clear
PWD, then OK
Turn off copier
Turn on.

Password should have been cleared.

[Farid Shahab]

Sir, the direction is not clear for me, is possible for making it more clear. much appreciated. Thanks, Farid

[mrfixit51]

Sir, the direction is not clear for me, is possible for making it more clear. much appreciated. Thanks, Farid

Press Additional Functions button
Press 2 button
Press 8 button
Press Additional Functions button
Navigate to "Clear"
Navigate to "PWD", then press OK
Turn off copier
Turn on.

I cannot make it any simpler unless you bring me the copier, and I do it for you...

[Farid Shahab]

Hi Sir, The direction worked, my copier is working perfect. Thanks again. Farid

[mrfixit51]

Hi Sir, The direction worked, my copier is working perfect. Thanks again. Farid

You are welcome! I am happy to have been of assistance.

[mimransk]

Canon D1120, department ID and Password Removal

Can anyone help me remove the Department ID and Password?

I just bought a slightly used Canon D1120 unit, when I turn it on, the display goes directly to the department ID and Password input...sadly No body knows the the codes.
Is there a default or universal codes? thanks in advance.

[mrfixit51]

Did you try the method mentioned above? I do not work on the imageclass copiers, I only work on the imagerunner copiers, but they often work the same way.