hi every body
i have ir2020 photocopy machine
give me messege " the drum is not set , install drum unit '
i make all ram clear , and remove drum and reinstall it and it's dos'nt work
please help
thanks
hi every body
i have ir2020 photocopy machine
give me messege " the drum is not set , install drum unit '
i make all ram clear , and remove drum and reinstall it and it's dos'nt work
please help
thanks
hello
i got same problem since 1 year in a deffernet machine try to remove all the connectors from the dc control
and the main board then turn on the machine and off it will work
Distinguished road makes you jewel in rough
Did you try to put old drum back in??
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Check if the developer pressure release lever mechanism is working properly. It may not be locking the drum unit securely to make proper contacts. Check also the drum contact...leaf spring on the machines body. This problem tends to be common with the Ir 2016/2020.
thanks for you
i will check all this hints and come back by the results tomorrow
thanks again
bye
Inspect>Check> & clean the high voltage contact to the drum unit-
2025.jpg
Also check the ribbon cable between the DC Controller and the HVT PCB
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
thanks for your help
the problem disappear by change HVT pcb
thanks alot again
bye
Good to hear that
Distinguished road makes you jewel in rough
Bookmarks