YES
At the primary transfer disengagement control, the sensor fails to detect although the specified time has passed (the
specified time differs depending on the mode)
Error in the Primary Transfer Disengagement Solenoid, Error in the Primary Transfer Disengagement Switch, or the ITB
Guide Rail error.
1. Replace the ITB Unit
2. Check the harness/connector between the DC Controller
PCB (UN09/J11) and the Primary Transfer Disengagement
Switch (SW01)
3. Check the harness/connector between the DC Controller
PCB (UN09/J11) and the Primary Transfer Disengagement
Solenoid (SL01)
4. Check conduction of FU6 on the DC Controller PCB (UN09)
5. Replace the ITB Guide Rail
6. Replace the Main Drive
7. Replace the Fixing Drive
8. Replace the DC Controller PCB (UN09)
Bookmarks