problem in canon copier ir2200, please check the attachment

[dhanesh]

hey friends dont waste time to think about this problem

its from developing unit
replace the magnet roller and cd spacers to fix this problem

if got any problem try and think from ground root level dont think its a laser drive or ccd unit etc

in my 10 year experience i cannot replace a laser drive till
have a nice day to all

[teckat]

Dear Friends,

Please check the attachment as i am facing the problem in canon copier ir2200. Even if i run the p print from the machine problem is same, so pls advise.

Thanks

Dilip

Replace the laser assembly (FG6-5633-000).

sample of bad LASER below

DISTORT.jpg

[zakjeiden]

Perhaps we have the same problem on my ir 3300 see attachment...I replaced my developing unit but the problem still there. maybe i will try replacing laser unit.

[teckat]

Perhaps we have the same problem on my ir 3300 see attachment...I replaced my developing unit but the problem still there. maybe i will try replacing laser unit.

is your issue on Prints & Copies ??

if not on Prints> only copies check Scanner unit--

[dhanesh]

Perhaps we have the same problem on my ir 3300 see attachment...I replaced my developing unit but the problem still there. maybe i will try replacing laser unit.

hi i got this problem in 3300 am change developing unit and solve this problem
pls check ur drum too if any scraches in both side of drum try to replace another drum

[teckat]

hi i got this problem in 3300 am change developing unit and solve this problem
pls check ur drum too if any scraches in both side of drum try to replace another drum

Poster stated they replaced the dev unit

Perhaps we have the same problem on my ir 3300 see attachment...I replaced my developing unit but the problem still there. maybe i will try replacing laser unit.

how would scratches on drum cause a wave on the document/ Explain ???

a poor Scanner unit can cause a wave on glass /copy image

[dilip_22]

Hi Friends,

Thanks all of you.

I solved that problem. I did not replace anything, just from service mode i changed value of developing bias. now machine is working fine.


Thanks

Dilip

[teckat]

Hi Friends,

Thanks all of you.

I solved that problem. I did not replace anything, just from service mode i changed value of developing bias. now machine is working fine.


Thanks

Dilip

Miracles do Happen// although hard to believe this fixed your issue

what was the exact procedure-change

[dhanesh]

Hi Friends,

Thanks all of you.

I solved that problem. I did not replace anything, just from service mode i changed value of developing bias. now machine is working fine.


Thanks

Dilip

hey dileep try to find correct problem of ur machine i think problem may be come back...

[zoraldinho]

Hi Friends,

Thanks all of you.

I solved that problem. I did not replace anything, just from service mode i changed value of developing bias. now machine is working fine.


Thanks

Dilip

I really need to see this procedure.