Another problem:
lumps of black toner on the iR ADV C5051 ...
I replaced both the black drum and the Developing the unit, but after a while (5,000 copies / prints approximately) the problem has reappeared ...
Have you ever?
Thank !
Another problem:
lumps of black toner on the iR ADV C5051 ...
I replaced both the black drum and the Developing the unit, but after a while (5,000 copies / prints approximately) the problem has reappeared ...
Have you ever?
Thank !
The toner is original, Canon...
Then I will post a copy.
Fuser causes this issue. There's a sep blade in the fuser that causes this issue. Make sure you update the firmware if you still have a v1 5051 as the firmware fixes a lot of the fuser related issues I've been seeing (groaning, 0113's) Only thing that sucks is the film alone is near 600 bucks.
I'll check....
But I ask me: why only with toner black and not with toner color ?
I wish I could answer that. Everytime I take them apart it's just black gunk on the sep guide. The drums for BK are different than the colours so perhaps that has to do with it. But I can say that I have successfully gotten rid of those streaks with the fuser/firmware update (I love CDS)
I found the cause!
Too black toner in the developing unit ! Removing the toner bottle and discharging the group of black (PG Type 5 at 255 to 100 sheets of A3 size), everything is back to normal!
Thank for the helps !
Too much Black toner in the dev unit? So are you saying this was a overtoning problem. Very dense black with some shaking off in the fuser? Really? As in ifailir6870fuus?
Where is our example attachment? I would like to see it!
Hi ....
This printer has something like 890,000.0 copies / prints.
And in total, just 165.000 color ...
He works extensively with the b / w ....
And for the last time he worked exclusively with the black group .....
Causing a overtoner black ...
Unfortunately I no longer have an example to show!
overtonedhanddrawing2cn3.jpg
heavy volume will usually not cause overtone on these new type iR's
just tell your customer to do the prescribed auto gradation procedures daily
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks