Firmware issue

[Blues Guy]

Hi guys,

Just to clarified is iR3030 and iR3045 firmware version for DC Con are the same ?

I have face the problem after I have upgrade the DC con firmware version on my iR3030 the machine will appear error code E110 & E733.

When upgrading the firmware I have mistaken selected the model instead of iR3030 I have selected iR3045. I have try reload back the correct model but the machine still appear the error code. After replace another pc DC con p.c.b from another machine the machine works back. I assume the firmware was not correct during I upgrade it. How to resolve these and is the firmware for both model same ?

[teckat]

Hi guys,

Just to clarified is iR3030 and iR3045 firmware version for DC Con are the same ?

I have face the problem after I have upgrade the DC con firmware version on my iR3030 the machine will appear error code E110 & E733.

When upgrading the firmware I have mistaken selected the model instead of iR3030 I have selected iR3045. I have try reload back the correct model but the machine still appear the error code. After replace another pc DC con p.c.b from another machine the machine works back. I assume the firmware was not correct during I upgrade it. How to resolve these and is the firmware for both model same ?

there used to be a e733 Flash Dimm issue on the imageRUNNER 4570 / 3570 / 2870 / 2270 / 3530 / 2830 / 2230 -series printers when u flashed DCon/ don't recall issue on your series

DCON is the same for 3030 & 3045
if u have the "ALL" still listed -select it to re-write all firmware
if u have newer SST > use the Start Assist Mode to re-write all
see pub-----TP09_396a.pdf

System Software v31.01.02
BootROM v12.44
Language v31.01 (JEFIG)*
RUI v20.09 (JEFIG)*
MEAP Cont v31.02
Pre Install App v2.50
SDL v1.10.1
SSO v3.4.1
Portal Service v2.1.1
Security Agent v2.0.1
DCON v5.01=== [iR3030/3035/3045]
DCON v5.02==== [iR3025]
RCON v13.02

[teckat]

SST Assist Mode
Assist Mode:
Assist Mode is a fast and easy way of flashing the machine without the use of batch files like the “ALL” / “ALL_HDF”. This feature works on most new imageRUNNER/ Color imageRUNNER models and imagePRESS models. It was implemented in SST v4.04Eq-

READ-----

[Blues Guy]

Thank you for your information Mr. Teckat,

Another question I would like to check out is do you think if I were to follow the step to flash again the firmware to the problem machine will solve the problem error code. I mean the D.C controller P.C.B will back to normal ?

[teckat]

Thank you for your information Mr. Teckat,

Another question I would like to check out is do you think if I were to follow the step to flash again the firmware to the problem machine will solve the problem error code. I mean the D.C controller P.C.B will back to normal ?

in the Assist mode, just select Overwrite All

SST.JPG

[Blues Guy]

Thank you Mr. Teckat

After flash the firmware again machine back to normal no more error code

[teckat]

Thank you Mr. Teckat

After flash the firmware again machine back to normal no more error code

Thumbs up.jpg