Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    E007 code on a Canon 6016
    Guest

    E007 code on a Canon 6016

    I have a Canon 6016 that gets E007 Codes. The fuser looks fine and has been replaced but I still get the codes every so often. I think I missing something, any tips out there


  2. #2
    hood4472
    Guest

    Re:E007 code on a Canon 6016

    This problem came from the fuser film not jogging back and forth over the sensor. Did you run the adjustment for installing a new fuser film when you installed the fuser? Other than that, just check to make sure the film isn\'t broken or missing a piece. Good luck.

    Robin


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here