Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    FSS / SPM 100+ Posts Setright's Avatar
    Join Date
    Nov 2008
    Posts
    247
    Rep Power
    34

    imagePRESS 7010 "Printing" in LCD....but never actually starts

    Dear kind readers!!

    I am stumped by this one.

    imagePRESS 7010 that flashes the green light and writes "Printing" in the display...but never actually begins printing. Paper is not fed from any of the cassettes. No error codes, just a never-ending wait for a print that never starts. Doesn't matter if we print from the Fiery, try to make a copy, or even print from Service Mode. All we get is "Printing....."


    We have a single POD, a stacker, a booklet finisher and a 3-way trimmer attached, but I don't think they are responsible - we have tried to disable all of these, and the print engine itself will still not print.


    The fusers were of course the first point of suspicion, and these are both assembled correct, and the temperatures are within the correct ranges.



    I wish the machine would at least give us an error code, because we don't know where to be looking. We have check the entire paper path for leftover paper, but there is none to find.



    Has anyone seen anything similar??

  2. #2
    FSS / SPM 100+ Posts Setright's Avatar
    Join Date
    Nov 2008
    Posts
    247
    Rep Power
    34

    Re: imagePRESS 7010 "Printing" in LCD....but never actually starts

    Hmmm...the machine was a little less recalcitrant this morning, printing a single page (the striped test print).

    It then decided to flash the error code E018-0202-05 - patch sensor. We removed and cleaned the sensor assembly and the printer running again.



    Not sure why the patch sensor took such a long time to make itself known, but the machine is running, so the customer is happy :-)

  3. #3
    teacher-guide-expert-guru 2,500+ Posts
    imagePRESS 7010 "Printing" in LCD....but never actually starts

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: imagePRESS 7010 "Printing" in LCD....but never actually starts

    Good to know.Thanks.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here