Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Technician cobra's Avatar
    Join Date
    Dec 2011
    Posts
    48
    Rep Power
    25

    Canon IR2200 jamming on fuser and blank copy

    I checked a Canon IR2200. The paper always stops in the fuser unit and the copy is blank. I checked the fuser, drum unit, transfer charger and all seems ok. The panel doesn't show any error code. The jam code is 0212. Need help on what area to check? The one thing that puzzles me is why the copy is blank so I cannot isolate the fuser unit as the problem. Thanks for any help, I really need it on this one.
    COBRA

  2. #2
    Trusted Tech 50+ Posts dhanesh's Avatar
    Join Date
    Jun 2010
    Location
    Thiruvananthapuram, KERALA
    Posts
    63
    Rep Power
    0

    Re: Canon IR2200 jamming on fuser and blank copy

    check pre- registration sensor
    DHANESH

  3. #3
    Master Of The Obvious 10,000+ Posts
    Canon IR2200 jamming on fuser and blank copy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Canon IR2200 jamming on fuser and blank copy

    The only guess that I've got is a laser unit failure. When you emergency stop the machine when the paper is under the drum, is there any latent image? Possibly a developing problem? Any error codes stored (but not displayed)? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Technician
    Canon IR2200 jamming on fuser and blank copy


    Join Date
    May 2010
    Posts
    29
    Rep Power
    29

    Re: Canon IR2200 jamming on fuser and blank copy

    Did you check Developer assly.. whether it is locked properly ?

  5. #5
    Technician cobra's Avatar
    Join Date
    Dec 2011
    Posts
    48
    Rep Power
    25

    Re: Canon IR2200 jamming on fuser and blank copy

    Quote Originally Posted by blackcat4866 View Post
    The only guess that I've got is a laser unit failure. When you emergency stop the machine when the paper is under the drum, is there any latent image? Possibly a developing problem? Any error codes stored (but not displayed)? =^..^=
    The error code stored is E733 and jam code 0212.
    COBRA

  6. #6
    Junior Member
    Join Date
    Jul 2012
    Location
    NM
    Posts
    5
    Rep Power
    0

    Re: Canon IR2200 jamming on fuser and blank copy

    Try replacing the drum unit. The worn drum could be drawing too much current from the power supply, causing your E-733 code and jam 0212 code.

  7. #7
    Technician tricotech1's Avatar
    Join Date
    Feb 2010
    Location
    Peoria, IL
    Posts
    40
    Rep Power
    0

    Re: Canon IR2200 jamming on fuser and blank copy

    It has been awhile since I had this problem, but due to noise or other issues the machine requires a DC controller reset or an MMI reset. In a worse case scenario, I needed to replace the HDD because it couldn't process the store image data on the hard disk. This is NOT related to a E 602 HDD code, but still would require the HDD replacement IN A WORSE CASE SCENARIO ONLY.

    Have you tried a DC controller reset or MMI reset?

  8. #8
    Service Manager 10,000+ Posts
    Canon IR2200 jamming on fuser and blank copy

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR2200 jamming on fuser and blank copy

    Quote Originally Posted by cobra View Post
    The error code stored is E733 and jam code 0212.
    Check the rear Transfer Roller holding block

    Check that the DIMM on the DC controller is mounted securely and is registered in service mode. Service mode>Copier>Display>Version>DC-CON.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Jul 2008
    Location
    Raleigh, NC
    Posts
    173
    Rep Power
    0

    Re: Canon IR2200 jamming on fuser and blank copy

    Quote Originally Posted by cobra View Post
    I checked a Canon IR2200. The paper always stops in the fuser unit and the copy is blank. I checked the fuser, drum unit, transfer charger and all seems ok. The panel doesn't show any error code. The jam code is 0212. Need help on what area to check? The one thing that puzzles me is why the copy is blank so I cannot isolate the fuser unit as the problem. Thanks for any help, I really need it on this one.
    This jam code has taken me to my knees before. I was getting it at power on. I have no solution other than unplugging the option pedestal with trays 3 and 4.

    Good luck,

    Hopper

  10. #10
    Technician
    Join Date
    Feb 2011
    Posts
    22
    Rep Power
    27

    Re: Canon IR2200 jamming on fuser and blank copy

    check door actuator for laser shutter, check developer ground spring, check DE-DC under adjust/developer have seen it jump out of range higher than 255

    Only thing that comes to memory on a 0212 jam code is the fixing exit actuator sticking. you can shave out the hole that the actuator drops down in, to stop that from happening. Not sure how that is related to the blank copies.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here