Have a C5030 (total counter 40K) that is folding corners of the paper from all trays, LT, LT-R, LG and Ledger ...
Is this a paper issue or something on the machine side, please?
Thanks in advance!
Have a C5030 (total counter 40K) that is folding corners of the paper from all trays, LT, LT-R, LG and Ledger ...
Is this a paper issue or something on the machine side, please?
Thanks in advance!
Something is on paper way.Make a force stop and find location.Problem solved in three minutes.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Please read the post, if there was something in the paper path then the corners of the short edge paper (LT-R and LG) wouldn't be the same as the corners of the long edge paper (LT, LD).
thanks for the reply anyway.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
I know these machines have an issue with the 2nd paper delivery assy. flapper on smaller sized papers due to the position of the ribs of the curved guide that feeds the paper towards the delivery tray.
This is most evident if the paper is slightly curled upwards after coming out of the fuser.
This could be a similar problem.
Bookmarks