Results 1 to 5 of 5
  1. #1
    Junior Member yus's Avatar
    Join Date
    Nov 2011
    Location
    Johor Bahru
    Posts
    2
    Post Thanks / Like
    Rep Power
    0

    Canon iR5570 Fax Kit

    i've already installed a fax unit to the machine. but when i try to fax a document, it'll continuously failed. i'd setting inside the service mode with my country code but it still can't go through. i also had replace the fax unit with another but still the same. anybody know what had cause this?


  2. #2
    Field Supervisor 2,500+ Posts


    zoraldinho's Avatar
    Join Date
    Mar 2008
    Posts
    2,954
    Post Thanks / Like
    Rep Power
    52

    Re: Canon iR5570 Fax Kit

    Fax board model?

    A little knowledge is a dangerous thing

    Click here to be sure



  3. #3
    Junior Member yus's Avatar
    Join Date
    Nov 2011
    Location
    Johor Bahru
    Posts
    2
    Post Thanks / Like
    Rep Power
    0

    Re: Canon iR5570 Fax Kit

    Quote Originally Posted by zoraldinho View Post
    Fax board model?
    my modem board is FM2-2789,


  4. #4
    Field Supervisor 2,500+ Posts


    zoraldinho's Avatar
    Join Date
    Mar 2008
    Posts
    2,954
    Post Thanks / Like
    Rep Power
    52

    Re: Canon iR5570 Fax Kit

    Do you have super G3 -R1?

    In service mode, select FAX > Type > TYPE and make settings for country/region of the FAX board.This operation
    enables the parameter settings suitable for communication specifications of each country/region.(When I
    changed setting of it turn off/on the main power switch according to the shutdown sequence.
    )

    Here, the minimum settings are made necessary for FAX communication.

    Basic settings

    Here, the minimum settings are made necessary for FAX communication.
    - User telephone number
    > [Communications Settings] > [Fax Settings] > [User Settings] > [Unit Telehone #] > Input fax number >
    [OK]
    - Types of telephone lines
    > [Communications Settings] > [Fax Settings] > [User Settings] > [Tel Line Type] > Select the type of the line
    > [OK]

    Communication Test


    Carry out a communications test to see if the fax functions of the machine operate as expected:
    1) Bring up the Send screen on the control panel.
    2) Send a test original to a party capable of a communication test, and check to see if the original is sent normally.
    3) Send a text original from the other party, and check to see if the original is sent normally.

    A little knowledge is a dangerous thing

    Click here to be sure



  5. #5
    Field Supervisor 500+ Posts


    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    745
    Post Thanks / Like
    Rep Power
    26

    Re: Canon iR5570 Fax Kit

    Check, if your customer uses VOIP; if so, disable ecm and try to lower the modem speed, in addition you can try to set the country settings to "other" to open the tolerance window as far as possible

    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here