Thanks: 0
Likes: 0
Dislikes: 0
Anyone know what would cause these marks on pages (see attachments)? Happening all the time printing or copying.
Removed process unit and everything looked good, including drum.
Stopped page mid-cycle and marks on copy before fuser.
Samples were run 11 x 8.5 with marks on edge of paper toward front of machine.
Any help appreciated.
Thanks in advance
Check developing assembly.Developing sleeve unit-fg5-8235-000 is sucks.
Hi,
If this happened after you cleaned the machine (and it was OK before) retrace what you did, remove & check any items you removed or cleaned. ------Especially developing unit
A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!
DAMENE ABDEL AZIZ
DJELFA
You've definitely got primary charge discharging somewhere it shouldn't. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks for the replies. It was doing this before I cleaned the machine. Customer called and said machine started doing it all of a sudden.
Hi,
replace the developing cylinder or the developing assembly.
FB6-6569-000 roller spacer
Check the cylainder spacer and also try to change the drum blade once happend with me and i change the blade try it
Distinguished road makes you jewel in rough
hi...yes sir it is happened with me once i replaced the developing assembly which corrected that image
fault...the HVT board causes this fault also
good luck
The major cause of this phenomena is the worn out spacers of the dev unit.I have encountered this problem many times and replacing the spacers has always solved it
Reply With Quote
Bookmarks