Dear All,
I have a problem of iRAC9065PRO
Now, it displays error code E002-0102 upon turn it on
I checked in service mode: Display>Analog>Fix-LC, Fix-LE, Fix-LE2. The values are always under 70oC
I assume that halogen lamp not turn on. The pressure roler has been heated up by fixing roler.
I take that halogen lamp out and check by meter, it is still ok, no crack, no disconnection
I refer in service manual it suggest to check AC driver PCB, DC controller...
The IH heater is working well, temp approach over 170oC so I do not think about AC driver PCB
Have you ever faced that problem and do anyone give me some advices for that issue
Thanks!
Nghia Luu
Bookmarks