Did you try playing with the dev bias? Also if this is a copy, take off the back cover and remove the reader ribbon coble and reseat/clean. If that is dirty that can cause this problem and other random toner defects in scans/emails etc.
Did you try playing with the dev bias? Also if this is a copy, take off the back cover and remove the reader ribbon coble and reseat/clean. If that is dirty that can cause this problem and other random toner defects in scans/emails etc.
我没有解决,我都要崩溃了。 打印和复印都一样。
~呵~呵~
iRA8105 , iRA6055, iR3570 , iR3245...
all has the same issue ,
anyway copy or print ......
~唉~
I also found this issue on IR3035, IR3570, IR4570, IR3245. Trying change Fix-Smr = still failed but Luckily I can solve the other (IR3570) by these factor : OEM toner, FIXIng film unit, Pressure and Bearing are smooth
Learning never ends..
Never give up, where there is a wheel there is a way..
if you are no use canon parts,
Do not say " you had solve any issue "
replace/ check the transfer roller
Maybe an old drum is helping this to occur.
Bookmarks