Thanks:
0
Likes:
0
Dislikes:
0
-
image runner 2525 service mode password?
hi...when iam trying to get into service mode on canon imagerunner 2525 there is a password box appearing on the display...is there any specific password to get through the service mode?thank you gentlmen.......
-
Senior Tech
100+ Posts
- Rep Power
- 30
Re: image runner 2525 service mode password?
-
Re: image runner 2525 service mode password?
Originally Posted by
doktor
7654321,7654321
thanks.......i will try it
-
Re: image runner 2525 service mode password?
The System Manager ID and System Password are both set to ‘7654321’ at purchase.
To specify the System Manager ID and System Password in the RUI:
Click [Register ID and Password] on the Edit System Settings page.
The Register ID and Password page is displayed. Specify the necessary settings .
Click [OK].
id.jpg
System Manager ID: Enter the System Manager ID (seven digits maximum).
Set/Change Password: Select this check box to set or change the System Password.
System Manager Password: Enter the System Password (seven digits maximum).
Confirm: Enter again the password to confirm it.
<Permit End-User’s Job Operation> can be specified only on the Remote UI.
Set ID and Password: Select this check box to set the System Manager ID and System Password.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Re: image runner 2525 service mode password?
thank you my dear for this usefull tip......
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks