LinkBack URL
About LinkBacksone of the canon ipr c-1 under my care does not develop magenta (developer grains on print) this is inter mittentchecked all connections and bias contact of magenta developer all okcan somebody help thanx in advance
one of the canon ipr c-1 under my care does not develop magenta (developer grains on print) this is inter mittentchecked all connections and bias contact of magenta developer all okcan somebody help thanx in advance
do you mean it pulls dev on to the page intermitently? like a banding effect?
no the whole area where magenta should develop is grainy
so its pulling dev onto the page feels rough to touch or is it faint magenta copies? any copy samples?
Originally Posted by sajank
on M rotation -BIAS clip on M Dev unit must make contact with Main Turret Bias plate-
Developing BIAS Input Assembly resides on the front plate of the P-Kit.
DV.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
yes the developer feels on the printthe m unit makes good contact with the dev-bias platethe problem is intermittent sometimes it run at end without any issues any advice please help
is this what your getting? look at the pictures. If it is, a board was replaced to cure the fault cant remmeber what board but it was on the right hand side when you open the side door thats all i can remember as its a long time back.
imagePRESS C1
Re: canon ipr c-1 development problem
have u tried a M Developer change ??? or replaced M Unit
see pdf----
Developer Change--imagePRESS C1-imagePRESS C1+.pdf
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Posting Permissions
Reply With Quote
Bookmarks