iR7095 Scanning documents analog style

**dzrtracin** · 08-14-2012

I have a customer that uses a analog NP6551 for a special application. They tape a small paper 1in by 2 1/2in to the glass that has a I.D. code on it, place documents in the feeder & the I.D. tab code gets copied onto every paper. Is there ANY way for a iR7095 to scan an original using the feeder like the NP6551? Anything in the service mode to change? Its a an odd application, but i need this work if possible

**sx633** · 08-14-2012

Is this ID tab the same all the time or does it change for different jobs ? I was wondering if you could scan the ID tab in and use it as a "watermark" or "stamp" like you can add "urgent" or "priority" on to copies in the print driver. just a thought.

**spectraindo** · 08-15-2012

Yes the IR7095 can do that job. Turn STREAM READING OFF .
In Service Mode : FEEDER > OPTION > DOC-F-SW = 2 (FIXED READING)
The Scanning Speed will be slower.

**dzrtracin** · 08-23-2012

You my friend are the BEST!

RIDE ON!

**dzrtracin** · 08-24-2012

Originally Posted by sx633

Is this ID tab the same all the time or does it change for different jobs ? I was wondering if you could scan the ID tab in and use it as a "watermark" or "stamp" like you can add "urgent" or "priority" on to copies in the print driver. just a thought.

It changes 10 times a day, bar code & part numbers, there for nuts, bolts etc. for landing gear. Getting that answer from spectraindo was HUGE. I even called esupport, said it has no chance to do that. I can say, canonesupport is not what it used to be. Thanks again guys!