i have one canon irc3220 xerox machine. i don't know how to configure or connect to my pc via router.
plz help me friends
i have one canon irc3220 xerox machine. i don't know how to configure or connect to my pc via router.
plz help me friends
first of all get the driver (pcl or ufrII) downloaded by the canon site.
then set an ip address in ur irc3220 according to ur network
(can be done by going - * > system settings > network settings > tcp/ip settings)
and connect the machine to the router with network cable
(use direct network cable no crossover as u are connecting thru router)
now install the printer in ur pc from the file u downloaded from net
and set port to standard tcp/ip and provide ip address u set in ur machine
have a test print to verify that all goes well.
(u can also use ping command)
is ur machine is shown on network ?
(use ping command to check the machine is in network or not
can also do this by typing machine ip in browser, if it is connected properly, the remote content page will be opened)
canon irc3220 rui page.JPG
see the img and tell me the machine support printing from pc
machine is in ur network ( with ip 192.168.1.2 )
now go in ufrII printer properties and check the port selected for the printing
set the above tcp/ip port for it.
//-->also make sure that u set ip address in machine and dns dynamic update is off
else whenever machine or network is restarted, machine gets new ip address automatically
-->also if ufrII not able to print then go for pcl driver//
Bookmarks