Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: e 024 ir3045

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Sep 2012
    Posts
    150
    Rep Power
    15

    e 024 ir3045

    Dear Sir,

    Pls i want the help to solve the error E000024-001 appears in the ir3045 even after change the toner sensor in the deveolping ass

    thanks
    akm

  2. #2
    Senior Tech 250+ Posts montana's Avatar
    Join Date
    Aug 2008
    Location
    benghazi
    Posts
    384
    Rep Power
    0

    Re: e 024 ir3045

    E024 The developing assembly connector is disconnected.
    0000 The connection detection signal is absent
    continuously for 100 msec.
    Replace the developing assembly toner
    sensor. Connect the connector. Replace the
    DC controller PCB.

  3. #3
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    805
    Rep Power
    24

    Re: e 024 ir3045

    some times one of the gears of the cylinder get stuck and cant move in ordinary way also made this pro,make sure that you are using OEM Toner .check the connector also as our friend said
    Distinguished road makes you jewel in rough

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Sep 2012
    Posts
    150
    Rep Power
    15

    Re: e 024 ir3045

    many thanks for your solution but i hear that if we upgrade the dc con version the problem solved if you know the steps can you tell me to solve the problem without change the dc ass




    thanks
    akm

  5. #5
    Service Manager 1,000+ Posts
    e 024 ir3045

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,169
    Rep Power
    41

    Re: e 024 ir3045

    Theres a mylar on the stirrer that is supposed to wipe the sensor on each turn. If it gets damaged and doesnt clean the sensor you will get e024

  6. #6
    Service Manager 10,000+ Posts
    e 024 ir3045

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,825
    Rep Power
    227

    Re: e 024 ir3045

    Mylar scraper sheet that needs to touch the inside surface of the developer wall.

    In the image below the inside surface of the developer wall is being touched by the mylar scraper blade. If the blade is damaged or broken off the toner will not be cleaned off of the sensor and give the error code E024. If the blade is the problem the developer will need to be replaced.
    The part number for the developer is FM2-0287-010.
    Attached Images Attached Images
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Technician
    Join Date
    Jun 2013
    Location
    Manado
    Posts
    10
    Rep Power
    12

    Re: e 024 ir3045

    In my case, not to be replace the toner sensor part, open box toner sensor tenderly, check cable tip broken and soldering again. Reset the machine clear error.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here