Originally Posted by
Boomer7
I have a machine thats 2 hrs away and I've been on site to clean patch sensor and reseat processing unit items. It worked for about 9 days then gave me the error again E020-0104. If the shutter drive ass,y was damaged as suggested in this tech pub would the error be showing up every 5-9 days after reboot or more consistent. Currently if you reboot the machine it will work for days then error E020-0104. I was thinking may be the blk drum then I found this thread with the tech pub. just trying to save trips because every visit I have to wait to see if it will error again days later. Any suggestions?
Bookmarks