insert Drum canon ir2545

[sahara]

I have one canon machine and it is showing insert drum,I have tried so many ways but it does not work.The message Insert drum still there even though we replaced with a used one.We swapped the same drum in other machine and it is working well,The machine is showing ready signal with the message insert drum and is not able to copy or print

[zoraldinho]

installing the drum unit.pdf

[kstan268]

I have one canon machine and it is showing insert drum,I have tried so many ways but it does not work.The message Insert drum still there even though we replaced with a used one.We swapped the same drum in other machine and it is working well,The machine is showing ready signal with the message insert drum and is not able to copy or print

had you solve this problem..becouse i had the same issue need help thank you

[teckat]

Đặt gạch
________________
hạt giống hoa phăng

DMCA Content Protection Service - Protect Your Content

Stupidity Doing Same Thing Over Button (0681).jpg

[REGSIS]

had you solve this problem..becouse i had the same issue need help thank you

It's the HV board.

Try to remove it, clean the contacts and put it back. 10 min work.
If that fails replace it from working machine just to confirm that's the cause of the problem.
After that order a new one.

[Kings]

It's the HV board.

Try to remove it, clean the contacts and put it back. 10 min work.
If that fails replace it from working machine just to confirm that's the cause of the problem.
After that order a new one.

I've also had this a few times and if it hasn't been the grounding contact inside the drum it has always been the HV board..

Good luck

[montana]

i believe it is the HVboard

[Phil B.]

Stupidity Doing Same Thing Over Button (0681).jpg

yeah he was canned about a month ago...damn spammers

[kstan268]

yeah he was canned about a month ago...damn spammers

My case is different .After replace HVT,Drum and PSU still problem occur..last i order a DC controller(Fm4-28640 Problem solve yeah