CANON IR c2880 Jamming at registration.

[zoraldinho]

Never seen a 2880 without those ( new type ) door / guide. Even from install.

Or in other words never seen a 2880 with the old 4570 type guide / lower door.

IR2880c old type
IR2380c new type

[CanonSco]

Products Affected: ---------Serial Numbers Affected:
Color imageRUNNER C2880 ---JUH00001 ~ JUH02169
Color imageRUNNER C2880 V2 --MNP00001 and Later
Color imageRUNNER C2880i ---JUJ00001 ~ JUJ02635
Color imageRUNNER C2880i V2 --MNW00001 and Later
Color imageRUNNER C3380 ---TXN00001 ~ TXN02065
Color imageRUNNER C3380 V2 --MMN00001 and Later
Color imageRUNNER C3380i ---TXP00001 ~ TXP03102
Color imageRUNNER C3380i V2 --MMP00001 and Later


had updated many of these affected serial numbers on East Coast >USA

I don't doubt it. Strange though. Got to say I don't recognise those serial numbers. Perhaps was different in the US over UK/EU. Any UK/EU techs had to change the old style guides on a 2880?

The OP should certainly take heed if he has the old style lower door and guide.

[Dan Dryer]

Any UK/EU techs had to change the old style guides on a 2880?

A few of the earlier 2880s had the old type lower door and guides. Only a very small number though.

[zoraldinho]

A few of the earlier 2880s had the old type lower door and guides. Only a very small number though.

Affected Machines:

iRC2880 120V : JUH02170 and later
iRC2880 230V EUR : JUL00872 and later
iRC2880 230V : JUT00010 and later
iRC2880 230V AU : JVB00483 and later
iRC2880 v2 120V : MNP00001 and later
iRC2880 v2 230V EUR : MNY00001 and later
iRC2880 v2 230V : MPA00001 and later
iRC2880 v2 230V AU : MRA00001 and later
iRC2880i 120V : JUJ02636 and later
iRC2880i 230V EUR : JUM14076 and later
iRC2880i 230V AU : JUZ00365 and later
iRC2880i 220V CN : JVD00029 and later
iRC2880i 220V KR : JVE00241 and later
iRC2880i 120V TW : JVC00018 and later
iRC2880i v2 120V : MNW00001 and later
iRC2880i v2 230V EUR : MNZ00001 and later
iRC2880i v2 230V : MQA00001 and later
iRC3380 120V : TXN02066 and later
iRC3380 230V EUR : TXR00638 and later
iRC3380 230V : TXT00024 and later
iRC3380 230V AU : TXV00588 and later
iRC3380 v2 120V : MMN00001 and later
iRC3380 v2 230V EUR : MMR00001 and later
iRC3380 v2 230V : MMT00001 and later
iRC3380 v2 230V AU : MMV00001 and later
iRC3380i 120V : TXP03102 and later
iRC3380i 230V EUR : TXS04652 and later
iRC3380i 230V : TXU00630 and later
iRC3380i 220V CN : TXX00042 and later
iRC3380i 220V KR : TXY00091 and later
iRC3380i 120V TW : TXW00018 and later
iRC3380i v2 120V : MMP00001 and later
iRC3380i v2 230V EUR : MMS00001 and later
iRC3380i v2 230V : MMU00001 and later

[Dan Dryer]

Affected Machines:
.......

Most of those serial numbers don't apply to the UK/Europe, and of the ones that do, only a tiny percentage were sold in the UK.

I remember the training machine having the old style door and guide, but in the field I've seen maybe 3 or 4 at the most.

[rexctacy]

First step is to replace the pick up, feed & separation roller, cleaning helps but is only a quick fix.

The registration flag can wear down if it is the old plastic type (it has been modified with a metal tip)

Also check the cassette dial is set to the correct size. e.g if the tray has A4 paper in & the dial is set to A4R the machine will jam.

I can supply you with said parts if rquired, as a test you can swap the rollers from another port, e.g A3 is not used as much & rollers are usually not worn.

hi there, thankyou everyone for your helpful info. i tried replacing the roller from the lower cassette (A3) but i looked like the last tech that looked at it had already swapped over rollers. the flag is the plastic type without the metal tip. cassette dial was set correctly. does anyone have the part numbers for the pickup, feed and sep rollers? also the part number for the registration switch (new modified part).

i was also reading teckat's post about replacing the right lower door assembly. ithink the machine needs this mod aswell. the serial number is JVB00***

[teckat]

2- Cassette feed rollers / FC6-7083-000
2-Cassette separation rollers / FC6-6661-000


registration switch ???

[rexctacy]

2- Cassette feed rollers / FC6-7083-000
2-Cassette separation rollers / FC6-6661-000


registration switch ???

Sorry, registration flag sensor

[rexctacy]

sorry to be a pain in the ass but
does anyone have the service and parts manual for this machine.
we have access to the cipg manuals but not the bisg.

[Canon.Tech]

I have PM'ed you the manuals