Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Oct 2009
    Posts
    99
    Rep Power
    17

    IRC adv 5051 Error

    Hi All

    Have a acceesory stapler finisher C1 giving me E 505-0001. I have put a new finisher controller board in with same result. I have moved the finisher to another 5051 and it gives the same problem.

    The problem should be with the finisher.

    Any ideas is welcome !!

    [SIGPIC][/SIGPIC]

    Life is a Journey enjoy the ride !!!

  2. #2
    Field Supervisor 500+ Posts Rachid.Akli's Avatar
    Join Date
    Oct 2011
    Location
    Algiers
    Posts
    585
    Rep Power
    20

    Re: IRC adv 5051 Error

    Quote Originally Posted by Gerhard View Post
    Hi All

    Have a acceesory stapler finisher C1 giving me E 505-0001. I have put a new finisher controller board in with same result. I have moved the finisher to another 5051 and it gives the same problem.

    The problem should be with the finisher.

    Any ideas is welcome !!
    Hi to all

    The EEPROM content is empty.

    In service mode > Finisher > Adjust===> put back the RAM values.


    Rachid.

    "Find a job you love and you’ll never have to work a day in your life." Nagy's father

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Oct 2009
    Posts
    99
    Rep Power
    17

    Re: IRC adv 5051 Error

    Quote Originally Posted by Rachid.Akli View Post
    Hi to all

    The EEPROM content is empty.

    In service mode > Finisher > Adjust===> put back the RAM values.


    Rachid.
    Thanx will give it a try tomorrow

    Regards

    [SIGPIC][/SIGPIC]

    Life is a Journey enjoy the ride !!!

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Oct 2009
    Posts
    99
    Rep Power
    17

    Smile Re: IRC adv 5051 Error

    Quote Originally Posted by Rachid.Akli View Post
    Hi to allThe EEPROM content is empty.In service mode > Finisher > Adjust===> put back the RAM values.Rachid.
    Thank You Problem solved !!!

    [SIGPIC][/SIGPIC]

    Life is a Journey enjoy the ride !!!

  5. #5
    Technician
    Join Date
    Aug 2011
    Posts
    29
    Rep Power
    13

    Re: IRC adv 5051 Error

    Quote Originally Posted by Gerhard View Post
    Thank You Problem solved !!!
    i have same issue here can you give me advice please... i did already entering the value as advice but still same.


    any help please


    regards
    Jason


  6. #6
    Service Manager 10,000+ Posts
    IRC adv 5051 Error

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: IRC adv 5051 Error

    Quote Originally Posted by yazj View Post
    i have same issue here can you give me advice please... i did already entering the value as advice but still same.


    any help please


    regards
    Jason
    ----------------------------------------------
    do the alignment width guide position or has the staple position been adjusted

    READ THIS
    E505_001.pdf

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Technician
    Join Date
    Aug 2011
    Posts
    29
    Rep Power
    13

    Re: IRC adv 5051 Error

    Quote Originally Posted by teckat View Post
    ----------------------------------------------
    do the alignment width guide position or has the staple position been adjusted

    READ THIS
    E505_001.pdf
    hi teckat,

    thanks foro the usefull documentation,

    what i did is i have the P-Print values of the machine. but when i try to put the value its not saving. it return to 0 value again.


    please advice.

    Thanks
    Jason


  8. #8
    Technician
    Join Date
    Jul 2015
    Posts
    24
    Rep Power
    5

    Re: IRC adv 5051 Error

    Does this pdf document apply to the IR C4080? The saddle stitcher instructions have no effect, while stacker alignment does.


  9. #9
    Service Manager 10,000+ Posts
    IRC adv 5051 Error

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: IRC adv 5051 Error

    Quote Originally Posted by w0179651 View Post
    Does this pdf document apply to the IR C4080? The saddle stitcher instructions have no effect, while stacker alignment does.

    -----------------------------------------------magnifying-glass.jpg

    the iRC4080 uses a Finisher W1/W2

    E 505-0001
    see pdf for your error/model




    Attached Files Attached Files
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    Technician
    Join Date
    Jul 2015
    Posts
    24
    Rep Power
    5

    Re: IRC adv 5051 Error

    Are there alignment instruction for the saddle finisher (saddle staple position) for the W2? The staples are constantly an 1/8" from the fold.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here